Circular Economy Training | Module 3

Implementing Circular Economy in your Organisation

Welcome to this module on an Implementing Circular Economy in your Organisation.


Introduction to the programme

This module is one of three modules within this Circular Economy training programme. You are required to complete all three modules.

Implementing Circular Economy in your Organisation

  • WMCA context and Routemap
  • Why do we need a Circular Economy?
  • Circular Economy principles
  • Social, environmental and economic benefits

Circular Economy Opportunities

  • Circular economy business models
  • Case studies

Implementing Circular Economy in your Organisation

  • Incorporating circular strategies and solutions into your business
  • Drivers, including policy and regulation
  • Levers to enable change
  • Metrics

Module 3 learning outcomes

By the time you have completed this module, you should have a good understanding of:

  • How to create an initial plan for incorporating a specific circular strategy (e.g. a 'take-back' scheme, designing for repair or switching to recycled inputs) that is relevant to your own business.
  • How key UK drivers, such as net-zero targets and Extended Producer Responsibility (EPR) regulations, create specific commercial risks and opportunities for your business.
  • The key internal 'levers’ you can use to enable change in your organisation, such as securing leadership buy-in, engaging staff or adapting design processes.
  • The importance of metrics and be able to identify at least two simple indicators (e.g. waste diversion rate, percentage of recycled content) you could use to measure the progress of a circular economy project.
  • A specific area of your business (like procurement, product design or end-of-life) to pinpoint a realistic starting point for implementing a circular solution.


Section 1 | Incorporating circular strategies and solutions into your business

Incorporating circular strategies

We have explored the R ladder model in a previous module. Here's a quick recap.

With consumers making more conscious choices around environmental and social value concerns, materials prices increasing and existing and upcoming legislation, there are an increasing number of reasons to move away from the ‘linear’ business as usual and towards a circular approach.

Take another look at the examples in the R ladder model. Which of these could apply to your business?

R0 - Refuse

Work around the product to negate its use or fulfil the requirement in a different, more circular way – e.g. not all vegetables need packaging just careful storage; replace high-impact materials (fossil fuel-based) with low impact (recycled, biobased); don't have giveaways at events; remove plastic bottles at offices, provide refillable water bottles and glasses.

R1 - Rethink

Designing for circularity – design for adaptability, flexibility, repairability, and ultimately disassembly and reuse. Use a different business model such as product as a service – rental rather than ownership – e.g. cars - ZipCars, refurbished phones – Music Magpie; camping equipment – Outdoor Hire.

R2 - Reduce

Use less materials and use lighter weight materials. Enable and incentivise consumers to use less, or at least maximise the use, of the items such as the 'access over ownership'/ per pay use models mentioned under Rethink.

R3 - Share/Reuse/Resell

Enable and incentivise reuse, sharing and take-back. The use by another consumer of a ‘new to them’ product which still fulfils its original function; it can be consumer to consumer or where product has been returned to the supply chain, such as MUD Jeans where you can either rent or buy and return them to be reused or recycled; or RMF raised access floors where they have a take-back scheme and reuse, remanufacture or recycle the products they receive.

R4 - Repair

Maintenance and repair to facilitate long life, such as the IFIXIT website, Re-Action Collective, (these link will open in a new browser tab) repairing outdoor gear, and Repair Cafes providing the opportunity to fix broken items resulting in fewer new purchases and hopefully new skills learned. This strategy may also include services such as those that combine sales, maintenance and the use of, for example, office furniture and bicycles.

R5 - Refurbish

Modernise or restore a product or space to enable extension of use; this is a lighter touch than remanufacturing. Examples might be reupholstering furniture, changing minor parts of washing machines, or reconfiguring a space and updating the lighting system in an office to be more energy efficient.

R6 - Remanufacture

This includes using parts of a discarded product in a new product with the same function, where more substantial intervention is required or where parts of outdated products are replaced to comply with new standards. Examples include Caterpillar Reman remanufactured engine blocks and Ricoh printers and photocopiers.

R7 - Repurpose

Repurposing is where a discarded product is adapted or added to make a new product with a different purpose or function, such as making shelves from a tabletop, creating a lampshade from a vase or converting a rowing boat into a bed-base.

R8 - Recycle

Recycling can include the use of by-products of other processes, for example, plant stalks, sawmill scraps and used coffee grounds; or the retrieval of materials from discarded products such as recycled coffee cups being made into travel mugs (upcycling as the disposable cups are being made into something of higher value) or glass bottles being made into glass wool insulation (downcycling where the new product is of lower value). Closed-loop recycling, such as old aluminium window frames being made back into window frames, is the highest value form of recycling.

R9 - Recover/Compost/Re-mine

And finally, examples of recovery include energy from waste incineration and anaerobic digestion, which convert waste flows into heat and power. Urban mining can also be put at the end of the cycle or equally with reuse towards the beginning of the cycle. It’s when products and buildings are designed with materials that are already in existence –'mining' what is already there.


Embedding circular economy principles

By embedding circular economy principles, organisations can minimise resource consumption, reduce waste generation and promote a more sustainable and regenerative economic model.

Let’s consider some questions to help you implement a different way of thinking

Let's go.


Questions to ask of your business

How can we use more circular materials?

  • What type of materials/products does your business procure/use? Think of purchasing materials and products that are more circular.
  • What volume of each material/product do you buy in? Are there any materials that you already know are less environmentally sustainable/have a higher carbon footprint? These questions can help you prioritise which products or materials to do a deeper review into first.

How can we adopt strategies to maximise resource efficiency?

  • What strategies can we use?

Resource efficiency

Adopt strategies to maximise resource efficiency, such as:

  • Optimising manufacturing processes to minimise material waste.
  • Designing to use less material.
  • Switching to renewable or recycled materials.
  • Can we reduce the amount of resources (e.g. materials/food/stationery/ energy/water) that we use and/or waste?
  • Utilising digital tools to monitor and reduce energy and water usage.

A few simple ideas to be (more) circular. Do you need:

  • Giveaways for an event? If yes, then how can it be low carbon, useful and meaningful?
  • Branded uniforms, or could you have badges?
  • Everything matching or could you (for example) have 6 blue chairs and 6 green chairs in your boardroom which means it’s easier to find reused ones. There are many furniture items now available second hand.
  • Brand-new tech? Could you buy refurbished, or at least ensure that your old tech gets refurbished?

Shifting the system involves everyone and everything: businesses, governments and individuals; our cities our products, and our jobs. By designing out waste and pollution, keeping products and materials in use and regenerating natural systems, we can reinvent everything.

What waste products do we produce and how can we turn that into a resource?

There should be no such thing as 'waste'. What we often treat as waste is just a resource in the wrong place. We need to change our mindset!

  • How can we make use of unwanted resources?

What 'spare' resources are there in your organisation? Examples could include:

  • Surplus materials from a construction site.
  • An underutilised forklift truck.
  • A by-product from a manufacturing process (e.g. orange peel from a juicing process).
  • Scrap from a metal pressing company.
  • An empty office space/storage area.
  • Or even spare time from a specialist who has been employed full time but isn’t at full capacity. They could be subcontracted out for a day a week to another business requiring that knowledge.

Is there any support available to in my area to facilitate this, such as the West Midlands Resource Reuse Network?

Turning Waste in Resources

Making use of others ‘unwanted’ materials:

  • Reuse wherever possible (e.g. act as a third party to enable this).
  • Review by-products and ‘waste streams’ of local businesses and be creative to add value.

Could a different supplier dispose of that surplus material, and can it be reused or recycled rather than incinerated?

How can we utilise circular design and product-as-a-service models?

  • What do you sell/provide?
  • Think of circular product design strategies.
  • Think of shifting from selling products outright to offering them as a service.

Circular design strategies

We need to ensure that new products are:

  • Designed for long life.
  • Easy to repair and maintain whilst in use.
  • Designed for easy reclamation, reuse or repurposing, or disassembly and upcycling or recycling at the end of its life.

Product-as-a-service

For example, leasing, sharing or subscription models.

This approach incentivises quality, longevity and ongoing customer engagement while retaining ownership and responsibility for the product throughout its lifecycle.

How can we implement circular business models?

  • How can your business facilitate circular practices through new business models?

Circular models

Think of offering rental, repair, maintenance or take-back at end-of-life services.

Develop a business model that allows access to the item through renting and a take-back system for reuse or recycling, or one that combines ownership with a take-back option at the end-of-life to incentivise materials being looped back into the system.

How can we develop circular supply chains?

How can you work with suppliers who prioritise sustainability and circularity? Source materials locally where possible, and ensure transparency and traceability throughout your supply chain to support closed-loop systems.

A company can’t operate in isolation in a successful circular economy. We need to build circular economy ecosystems by working closely with our supply chains.

It may seem daunting and can take significant time and investment to completely change business models, but some changes can be done in shorter time scales, cost effectively and deliver a positive impact quickly.

Review where changes could be made and then talk to your suppliers and clients. Having conversations doesn't cost anything, and some of your clients and/or suppliers may be asking themselves similar questions. You may be able to implement some initiatives jointly or do small, collaborative pilot projects to test new models.

As with any fundamental change, moving to a more circular business model requires planning and time. Some changes will be easier and others will take longer and require more planning and investment. Have big ambitions and aim for the top of the R ladder as the longer-term goal, but acknowledge that balancing economic, environmental and social responsibilities can sometimes be a ‘two steps forward and one step back’ long-term game plan. We need 90% of us to be implementing circular economy strategies and practices as best we can, not just 10% of us doing it perfectly.


Collaboration and partnerships

Let’s consider how different departments could incorporate circular thinking into their work.

Who are your partners/stakeholders?

How could you work better with them to achieve (more) circularity?

  • Form alliances with suppliers, customers and industry peers to share resources and knowledge.
  • Collaborate with partners across your value chain.
  • Engage stakeholders and set clear sustainability targets.
  • Participate in circular networks and platforms for material exchange.
  • Engage with local government and community initiatives to support circular practices.

Procurement to drive carbon reduction and circular solutions

Procurement can drive innovation: procurement strategies that focus on sustainability, collaboration and innovation can contribute significantly to the transition towards a circular economy. Select the arrows on the right of this page to view examples on how this is implemented.

Supplier selection

Procurement teams can prioritise suppliers who embrace circular economy principles, such as those that use recycled or renewable materials, have sustainable manufacturing processes, and promote product reuse or recycling. Assessing suppliers based on their environmental performance and adherence to circular economy principles can help create a more sustainable supply chain.

Long-term partnerships

Building long-term relationships with suppliers fosters collaboration and innovation. Procurement teams can work closely with suppliers to develop and implement circular economy initiatives, such as product take-back programmes or closed-loop supply chains. These partnerships can drive sustainable product design, promote resource efficiency, and facilitate the return and reuse of materials.

Sustainable material sourcing

Procurement can prioritise the procurement of materials with high recycled content or those that are sourced from renewable or sustainable sources. By reducing reliance on virgin materials and promoting the use of recycled inputs, procurement strategies can support the circularity of materials and minimise resource depletion.

Lifecycle assessment

Integrating lifecycle assessments into the procurement process helps evaluate the environmental impact of products throughout their entire lifecycle. This includes considering factors such as raw material extraction, production, transportation, use and end-of-life disposal. Procurement teams can make more informed decisions by selecting products with lower environmental footprints and longer lifespans.

Circular design and product innovation

Procurement can collaborate with suppliers and internal stakeholders to encourage circular design principles. By incorporating concepts like durability, repairability and recyclability into product specifications, procurement strategies can drive the development of more sustainable products that align with circular economy principles.

Waste management and recycling

Procurement teams can support the circular economy by engaging with suppliers to establish effective waste (resource) management and recycling practices.

This may involve working with suppliers to implement take-back programmes, ensuring proper disposal and recycling of materials, and encouraging the use of recycled materials in packaging.

Performance measurement and reporting

Procurement strategies can include metrics and targets related to circular economy goals. By tracking and reporting key performance indicators, such as the percentage of recycled materials used, waste reduction or the number of products repaired or refurbished, businesses can monitor progress and drive continuous improvement.

Knowledge sharing

can facilitate the exchange of knowledge between suppliers, industry peers and internal teams. Sharing data, challenges and success stories creates a collective intelligence that drives broader systemic change and helps standardise circular practices across the value chain.



Section 2 | Drivers, including policy and regulation

Drivers for a circular economy

A circular economy helps cut costs at multiple stages of the product lifecycle – from sourcing and production to distribution and end-of-life. Companies adopting circular practices often gain a competitive advantage by improving margins, reducing risk and responding to both environmental and economic pressures.

Reducing carbon emissions – net zero and the circular economy

  • ISO Net Zero Guidelines.
  • Procurement Policy Note 06/21: Taking account of Carbon Reduction Plans in the procurement of major government contracts.

Supply chain disruption and material scarcity

  • Circularity reduces dependency on raw materials.
  • Circularity enhances supply chain resilience.

Opportunity to reduce cost

  • Lower production and operational costs.
  • Waste management savings.
  • Reduced raw material costs.
  • New business models with lower capital costs.

SKeeping up with legislation

  • Keep informed of changes and how you can implement them.

Reducing carbon emissions

Net zero and the circular economy

ISO Net Zero Guidelines, launched at COP27 in 2022, aim to provide a single, globally agreed-upon ‘common reference’ that brings clarity, ambition and integrity to net-zero pledges. They were created to tackle the widespread confusion and ‘greenwashing’ surrounding net zero by setting a clear, high bar for what ‘good’ looks like. They set a common path for:

  • The definition of ‘net zero’ and related terms (greenhouse gas removals, offsetting, value chain, etc.), clarifying the differences in scope between direct emissions, indirect emissions from purchased energy and other indirect emissions arising from an organisation’s activities,
  • High-level principles for all actors who want to achieve climate neutrality,
  • Actionable guidance on getting there as soon as possible, by 2050 at the very latest, and
  • Transparent communication, credible claims and consistent reporting on emissions, reductions and removals.

Select the link to learn more about ISO - Net Zero Guidelines , (the link will open in a new browser tab).


Reducing carbon emissions

Procurement Policy Note 06/21: Taking account of Carbon Reduction Plans in the procurement of major government contracts

This guidance supports Procurement Policy Note (PPN) 06/21 and sets out how suppliers’ carbon reduction plans and commitment to Net Zero can be taken into account in the procurement of relevant contracts (i.e. those subject to the Public Contracts Regulations 2015, with a value of £5 million per annum or above and where the measure is related and proportionate) by in-scope organisations.

The key requirements related to Scope 3 emissions are:

  1. High-level principles for all actors who want to achieve climate neutrality,
  2. Commitment to Net Zero: Suppliers must commit to achieving Net Zero by 2050.
  3. Reporting Standards: Suppliers must declare their GHG emissions in accordance with the required reporting standards.
  4. Environmental Management Measures: Suppliers must outline the environmental management measures they will apply in the performance of the contract.
  5. Assessment Criteria: The assessment of suppliers' Carbon Reduction Plans will consider their understanding of their environmental impact and their commitment to reducing these emissions.

Circular economy supports carbon reduction and social value targets

Moving to a circular economy is part of the solution to creating a healthier, lower carbon world.

With 55% of our carbon emissions globally coming from energy (operational), reducing our energy consumption and moving to renewable energy both play a vital role in addressing climate change, but this alone will not be enough.

In order to achieve targets on climate, it’s critical that we complete the picture through a transition to a circular economy, transforming how we design, make and use products, buildings and food to address the remaining (embodied) 45%.

Select the link to view the source Ellen Macarthur Foundation , (the link will open in a new browser tab).


Circular economy - carbon reduction and social value targets

The Ellen MacArthur Foundation shows that while the energy transition can address 55% of global emissions, we must adopt a circular economy to tackle the remaining 45% that comes from how we make and use products, food and materials.

Operational carbon (55%)

(or carbon energy emitted by energy sources) refers to the greenhouse gas emissions produced during the use phase of a building or product. This includes emissions from activities such as heating, cooling, lighting and powering equipment and vehicles.

Embodied carbon (45%)

Is the carbon footprint of a product or building before (extraction, transport and manufacturing) and after (disposal) it’s operational (or use) phase.


Circular economy - carbon reduction and social value targets

Transitioning to a circular economy can support our journey to net zero while creating a thriving and resilient economy. Take a look at these news headlines for example.

To achieve net-zero, infrastructure must embrace the circular economy

Without investment in circular business, we won’t reach our net-zero goals

Circular business investments bring both climate-wins and resilient, risk-adjusted returns

Circular economy and Net Zero: How can carbon footprinting reinvent the mobile phone market?

Net-zero not possible without circular economy, Ellen MacArthur Foundation finds

Focusing on decarbonising the energy sector alone will not put the world within touching distance of a net-zero carbon economy, according to a new report from the Ellen MacArthur Foundation which claims that the transition to a circular economy is also vital.


Supply chain disruption and material scarcity

Circularity reduces dependency on raw materials

In a circular economy, materials are reused, repaired, refurbished or recycled, reducing the need for new raw materials. This lowers exposure to supply chain shocks from geopolitical instability, mining restrictions or resource depletion.

For example: Using recycled aluminium instead of mining bauxite avoids reliance on volatile global mining supply chains.

Circularity enhances supply chain resilience

Circular models often involve local or regional loops (e.g. local repair hubs, urban mining), reducing exposure to international shipping delays, tariffs or export bans.

Modularity and repairability also extend product lifespans, easing the pressure on just-in-time supply chains.

For example: A modular smartphone can have a broken component replaced locally, avoiding the need for a full import of a new device.


Opportunity to reduce cost

Adopting circular economy principles can unlock significant financial advantages and cost savings for businesses in several key areas:

Lower production and operational costs

Refurbishing, remanufacturing or reusing parts saves money compared to producing new components. Designing for easy disassembly and repair can streamline maintenance and reduce downtime.

For example: Remanufacturing an engine or machine part can cost significantly less than producing a new one.

Waste management savings

Circular systems minimise waste generation, which means lower costs for disposal, landfill fees and regulatory compliance. Some waste can even become a source of revenue when sold or reused internally.

For example: A food manufacturer can repurpose by-products as animal feed or compost instead of paying for disposal.

Reduced raw material costs

By using recycled or reused materials instead of virgin resources, companies can cut material procurement expense – this is especially important, as raw material prices rise due to scarcity or volatility.

For example: Reusing key building materials like timber and steel when undertaking the redevelopment of a building.

New business models with lower capital costs

Models like leasing, sharing and product-as-a-service allow companies to retain ownership of products and reuse them multiple times.

For example: In the fashion industry, clothing rental services allow garments to generate revenue multiple times from a single production cycle.


Keeping up with legislation

The EU and the UK are tightening laws around waste, carbon emissions, product design and resource use.

Implementing circular strategies now can prepare businesses to meet these new demands before they become mandatory.

Circular economy actions, like designing for durability, reusability and recyclability, directly align with these regulations.

An overview of EU and UK circular economy related legislation that have been adopted and proposed since January 2020.

Divergence refers to the difference between the EU and UK approaches to these policy areas. High divergence means that there is a bigger difference between the approaches taken.

Policy area EU Legislation UK Legislation
Ecodesign & sustainable products Ecodesign for Sustainable Products Regulation (2024) – High Divergence Ecodesign for Energy‑Related Products and Energy Information Regulations (2021) – High Divergence
Commission Regulation on Ecodesign requirements for smartphones, mobile phones other than smartphones, cordless phones and slate tablets (2023) – High Divergence 2024 Digital Markets, Competition and Consumers Act – High Divergence
Directive on Repair of Goods (2024) – High Divergence
Directive on empowering consumers for the green transition (2024) – High Divergence
Directive on Green Claims – High Divergence
Textiles Amendment to the 2018 Waste Framework Directive – Medium Divergence
Food Amendment to the 2018 Waste Framework Directive – Medium Divergence The Separation of Waste (England) Regulations (2025) – Medium Divergence
Buildings Construction Products Regulation (2024) – High Divergence
Energy Performance of Buildings Directive (2024) – High Divergence
Batteries Regulation on batteries (2023) – High Divergence
Critical Raw Materials Critical Raw Materials Act (2024) – High Divergence
Commission Recommendation on improving the rate of return of used and waste mobile phones, tablets and laptops (2023) – High Divergence
Circular Economy Act (expected 2026) – High Divergence
Plastics Directive on Single Use Plastics (2019) – Low Divergence Environmental Protection (Single‑use Plastic Products) (Scotland) Regulations (2021) – Low Divergence
Regulation on circularity requirements for vehicle design – Low Divergence The Environmental Protection (Single‑use Plastic Products) (Wales) Act (2023) – Low Divergence
Proposal for a Regulation on preventing plastic pellet losses to reduce microplastic pollution – Low Divergence The Environmental Protection (Plastic Plates, etc. and Polystyrene Containers, etc.) (England) Regulations (2023) – Low Divergence
Ban on single‑use vapes (2024) – Low Divergence
Packaging Extended Producer Responsibility Obligations – Low Divergence Producer Responsibility Obligations for Packaging and Packaging Waste (2024) – Low Divergence
Deposit Scheme for Drinks Containers (2025) – Low Divergence

Select the link to view the source IEEP Report , (the link will open in a new browser tab).


Knowledge check

Embodied carbon emissions can be reduced by implementing circular economy strategies and practices.


Knowledge check

In addition to reducing carbon emissions, the additional drivers covered in this module are supply chain disruption and material scarcity, the opportunity to reduce costs, and keeping up with legislation.


Increasing Your Resilience

Reflect on how moving to circular practices can reduce risk and increase resilience for your business (think about supply chain, waste, raw materials).



Section 3 | Levers to enable change

WMCA levers for advancing the circular economy

In this next section we will focus on the levers to enable change towards a circular economy. There are five key areas as listed below.

Governance

Governance is an essential lever, encompassing the structures and processes that guide decision-making and coordination among stakeholders.

This includes: implementing robust internal processes, convening experts and partners, encouraging partnerships and collaboration, developing new supply chains, and supporting a wider adoption of new, innovative circular business models.

Strong governance strikes a balance between incentivising innovation and regulation, ensures that circular economy initiatives are aligned with broader sustainability goals, facilitates collaboration between public and private sectors, and provides mechanisms for measurement and monitoring progress, and enforcing commitments.

Capacity-building

Capacity-building is vital for empowering individuals, organisations and communities. This involves access to green finance, education and training programmes, technical assistance, best practice, and knowledge sharing to develop the necessary skills and expertise.

Key to this is incorporating a comprehensive behaviour change programme to encourage a shift in societal thinking, supporting upskilling and training, and strengthening existing business support programmes.

By investing in capacity-building, communities and organisations can foster innovation, support workforce transition, and ensure that all actors are equipped to participate effectively in circular initiatives.

Soft infrastructure

Soft infrastructure to support system-wide innovation, improving linkages between research and commercial application, using data platforms, digital infrastructure, networks, data standards and materials passports to accelerate the transition, and ensuring logistic systems support the movement of goods and materials.

This entails enabling efficient information exchange, facilitating collaboration, and supporting the tracking and optimisation of resources throughout their lifecycle.

Soft infrastructure helps to connect stakeholders, share best practices, and drive transparency in circular processes.

Hard infrastructure

Hard infrastructure encompasses investing in critical physical assets necessary for circular activities, including waste/recycling facilities, renewable energy installation, and in shared spaces, resource recovery/reuse hubs and storage facilities.

Investment in hard infrastructure is crucial for enabling the practical implementation of circular strategies, such as material recovery, remanufacturing and closed-loop supply chains.


WMCA levers for advancing the circular economy

Across all of this is behaviour change – even with excellent tools, guides and infrastructure, and green finance to support the circular model, if there is not a broad or deep enough change in how we operate, it will be difficult to achieve a circular economy at scale, not least because a circular economy requires all parties to work collaboratively.

Together, these levers – policy and regulation, governance, capacity-building, soft infrastructure, and hard infrastructure – form the backbone of efforts to advance the circular economy. By strategically strengthening each lever, we can accelerate the shift towards a more sustainable, resilient, and resource-efficient future.


Knowledge check

The levers that can be used to advance a circular economy are policy and regulations, capacity-building, hard infrastructure, soft infrastructure, and governance.


Section 4 | Metrics

Measuring circularity is important in order to be able to make informed choices between processes, products or companies; and also to baseline and track progress against internal initiatives to become more circular.

  • At the systems level measuring circularity can look at material flows, such as the percentage of recycled materials, the percentage of reused/secondary materials and the percentage of bio-based/renewable materials vs virgin materials used by the organisation.
  • It could include how much water is used (and whether any of it is recycled back into production cycles), and whether energy is generated by renewables.

  • At the business level, it can be used as an internal tool to assess the different materials associated with operations and to understand the potential value and progress of circular strategies and tactics in action.
  • This could be measured by department and include qualitative and quantitative measures including procurement choices and training undertaken.

  • At the product level, metrics can utilise tools such as lifecycle assessment to understand the whole-life impacts of design decisions.
  • The impact of the adoption of circular design strategies and circular business models could be a key part of this – for example, trialling one product line to create a product-as-a-service model.


Metrics

No single generally accepted methodology to measure circularity has yet emerged. What is perhaps more important is that once a metric(s) has been chosen, what that metric(s) is and how it has been implemented should be clear and transparent, showing what has worked and what hasn't. This is vital to avoid greenwashing and beneficial to share lessons learned.

However, there are a number of tools that assess circularity qualitatively or quantitatively including:

Corporate circular target-setting guidance from the Circular Economy Indicators Coalition

Businesses can use this guidance to learn about best practice KPIs for the circular economy and understand how to select and set these KPIs. The KPIs have been supplemented with detailed guidance to assist a business’ circular target setting journey.

The materials point individuals to helpful resources and tools such as existing standards, measurement frameworks, disclosure requirements, key considerations and questions to ask, and leading examples.

The guidance is oriented around ensuring that a business can select impactful targets that will help to answer four fundamental questions about their value chain and overall impact:

  • What materials are you using?
  • What waste are you producing?
  • Of the products that go to market, what are you collecting and recycling?
  • How are you enabling circular business models and circular engagement with customers?

Select the link to view the source Platform for Accelerating the Circular Economy website , (the link will open in a new browser tab).


Metrics

Measuring impact and continuous improvement

A robust system for measuring circular impact and driving continuous improvement involves several key actions:

  • Set clear targets – for example, regarding circular materials choices, waste reduction and resource efficiency.
  • Be transparent both about what criteria you are reporting on and how you are measuring it.
  • Track progress with regular reporting and audits.
  • Use feedback to refine strategies, scaling up successful initiatives.

Communication and engagement

A successful circular transition is also supported by clear communication and active engagement with staff, customers and stakeholders:

Educate staff, customers and stakeholders about your circular initiatives. Share success stories, promote involvement and demonstrate the environmental, societal and business benefits of circular solutions to build a culture of sustainability and circularity within your organisation and across your supply chain.


Section 5 | Further reading

Want to find out more?

Construction

Select the links below to learn more. The link will open in a new browser tab.

The Alliance for Sustainable Building Products - The Reuse of Glass Partitioning Systems

LETI - Circular Economy 1-pager

UK Net Zero Carbon Buildings Standard - Robustly verify that buildings are Net Zero Carbon Aligned, in accordance with the UK’s climate targets

UKGBC - How Circular Economy Principles can impact carbon and value

Circular Buildings Toolkit - Decarbonise your project with this step-by-step guide

UKGBC - Circular economy guidance for construction clients: How to practically apply circular economy principles at the project brief stage

FPA Material Reuse Playbook and Material Reuse Guide

Green Alliance - Circular construction: building for a greener UK economy

Clothing and textiles

Select the links below to learn more. The link will open in a new browser tab.

EURATEX – Facts and Key Figures: The textile and clothing industry in 2024

WRAP - UK Textiles Pact

Publications Office of the European Union - Sustainable and circular textiles by 2030

WRAP - ACT UK - Transitioning to a UK Circular Textiles Ecosystem Report

Circular Textiles Foundation

White Rose University Consortium - Sustainable and Circular Practices in the UK Fashion and Textile Industry

WRAP - Circular business models for fashion and textiles

PACE - Circular Economy Action Agenda Textiles

Manufacturing and other

Select the links below to learn more. The link will open in a new browser tab.

World Economic Forum - Driving Ambitions: The Business Case for Circular Economy in the Car Industry – Insight Report

UKRI Interdisciplinary Centre for Circular Chemical Economy - CircularChem Explained A Circular Future for the Chemicals Industry

World Economic Forum – Circular Transformation of Industries: Unlocking Economic Value

Green Alliance - In the loop: stories of businesses delivering the circular economy

Ellen Macarthur Foundation - Unlocking a reuse revolution: scaling returnable packaging

Ellen Macarthur Foundation – Plastics

Circular Electronics Partnership - The Circular Electronics Roadmap

Food and drink

Select the links below to learn more. The link will open in a new browser tab.

WRAP - UK Food and Drink Pact

Ellen Macarthur Foundation – Cities and Circular Economy for Food

ReLondon - Food that doesn’t cost the earth A circular economy guide for the food service industry

Ellen Macarthur Foundation – A Circular Economy for Food Packaging

Ellen Macarthur Foundation - The big food redesign

Community related

Select the links below to learn more. The link will open in a new browser tab.

Ellen Macarthur Foundation - Benefits to communities

Resource Futures - Webinar: Circular economy policies for a just transition

Circular Communities Scotland - Empowering Scottish Communities to Deliver a Circular Economy

Ruse Network

Circular Malton & Norton

Doughnut Economics Action Lab – Communities & Art


Recap and next steps

You have now completed the third and final module in this programme. We hope that you have found the information useful.

You should now have a good understanding of:

  • How to create an initial plan for incorporating a specific circular strategy (e.g. a 'take-back' scheme, designing for repair or switching to recycled inputs) that is relevant to your own business.
  • How a circular economy can support your business to reduce risk and become more resilient, and turn key UK drivers like net-zero targets into opportunities.
  • The key internal 'levers’ you can use to enable change in your organisation, such as securing leadership buy-in, engaging staff or adapting design processes.
  • The importance of metrics and be able to identify at least two simple indicators (e.g. waste diversion rate, percentage of recycled content) you could use to measure the progress of a circular economy project.
  • A specific area of your business (like procurement, product design or end-of-life) to pinpoint a realistic starting point for implementing circular solutions.

Select the link for more information about how the WMCA is advancing circular economy in the West Midlands region. The link will open in a new browser tab.

You may now exit out of the module.



RESOURCES